Powder Coating | Mil Thickness  |  Mil Gauge |  Paint Meter  |  Paint Gage  |  Coating Thickness Gauge  | Tester Paint Thickness | Paint Meters | Mil Gauge | FenderSplendor  | Powder Coating Supplies | Paint Tester |Dry Film Mil Gauge

Just Announced,

December Holiday Prices In Effect While Current Inventory Lasts + Free Shipping

Buy before December 31st and you can own a $700-$1,000 state-of-the-art coating thickness gauges (mil gauge), that measures over both steel and aluminum, for less than $500...shipped to you free--by 2nd day air. As an added Holiday bonus you get a free ($150 retail value) MP 4 player.

A Precision Mil Gauge is critical to avoiding mistakes. Apply too much coating and you lose money, sometimes lots of money.  Apply too little coating and you can lose customers and your reputation. More and more of your customers are inspecting every job to make sure they are getting the thickness they specified. The bottom line is: MISTAKES ARE COSTLY!

Read on to learn the 10 reasons why the FS 502 is the absolute best value in an ultra high precision coating thickness gauge.

Manufactured and sold directly by FenderSplendor, we cut out all the distributors and middlemen so you save hundreds of dollars. In just 4 short years FenderSplendor has over 6,000 satisfied thickness gauge customers.

December Free Gift Offer...good until Dcember 31st. Get a FREE MP 4 Player with all accessories with every FS 502 you purchase (limit 2) This is a $150 retail value, yours FREE.  Click Here to see the Amazing FS 2222 MP 4 Player You get FREE with your order of an FS 502

( CLICK HERE to to see our special December Sale Prices...good until December 31st.)

Here are the 10 reasons why the FS 502 Coating Thickness Gauge is becoming the fastest selling industrial coating thickness gauge in history. During September you can buy direct and save over $300...plus get a $25 rebate

• Every FS 502 comes with a 90 day 100% satisfaction guarantee. Click here for details.
  
  
• The FS 502 measures over both steel and aluminum. (fe & nfe)
  
  
• Written, 3 year warranty, covering 100% of the gauge including the probe. We offer an immediate replacement gauge so you never have to worry about long delays and expensive repairs. Click here to see our exclusive 3 year warranty.  No more waiting for your gauge to get sent to England or Germany, and then sent back to you. We put our warranty right up front for everyone to see...where is the competition's warranty? Others 'say' they offer a replacement warranty; then their fine print says "repair or replace"--at their discretion!
  
  
• Lighted "Ice Blue" readout makes it easy to read in low light situations. No one with in hundreds of dollars of the FS 502 offers this.
  
  

  Allen, Thanks for the lighted thickness checking gage as it has been great to use and see in the shop. It is easy to use and calibrate if necessary. Once you check the coating thickness you can move on and verify another section. I would recommend this tool to anyone. Thanks, Bruce Warne Manufacturing Engineer Edelbrock Corporation

  
  
  
   
• CLICK HERE to see a few of the Actual Companies using the FS 502
  
  
• Manufactured by a precision instrument laboratory with over 10 years experience in high-accuracy hand-held coating thickness gauges.
  
  
• Single and continuous measurement mode. 
  
                                          

  FS 502 Paint Meter with Cool Blue Lighted Readout

  
  
  
• Readings in mils or microns
  
  
• Range to 50 mils thickness (1250 microns)
  
  
• Resolution: .1 um (0 to 99.9 um) 1 um over 100 um. Mils read in 10ths.
  
  
• CLICK HERE for the complete Technical Specifications.
  
  
• Large 10 mm LCD for easy reading, displays 4 digits.
  
  
• Accuracy: 1-3% or 2.5 um (.1 mil) whichever is greater.
  
  
• Automatic substrate recognition. Switches from fe to nfe (steel to aluminum) automatically.
                
  
• Uses 3 AAA batteries for long life.
    

  FS 502 Coating Thickness Gauge with Custom Leather Holster

  
  
• Small compact size and ergonomic shape fit comfortably in your hand. The FS 502 is 20% smalller than most competitive gauges.
  
  
• Call 1-866-310-2539  24/7 if you have any questions or would like to order directly with a real live person.
  
  
• CLICK HERE to see who is using a FS 502 Coating Thickness Gauge
  
  
• Size: 4.25 x 2.25 x 1.125
  
  
• Weight: Including Batteries, 3.8 oz.
  
  
• Can be calibrated to "0" on the included reference plates.
  
  
• Comes with a free set of shims so it can be calibrated to a specific thickness standard.  Most of our competition charges for a set of shims.
  
  
• Comes with a free standard protective, foam lined carrying case. CLICK HERE to see the case and accessories.
  
  
• Over 6,000 satisfied FenderSplendor Customers in just the last 4 years. CLICK HERE   to see who some of our customers are.
  
  

Three free gifts if you order before

1. A $24.95 embossed, custom grain leather belt holster. Carry the FS 502 Paint Meter with you when you need to use it on a daily basis. Yours free with this limited time offer.

2. Free Shipping and Handling including UPS 2nd. day air to anywhere in the USA. You save $21.50.  Overnight shipping is available on orders placed by 2PM Eastern for an additional $20

3. Just added...get a FREE Mini MP 4 Player with your order of each FS 502 (limit 2) . This $150 retail value player is yours free. CLICK HERE to see all the details on the FS 2222 MP 4

OK...what's the hitch?  How do you sell a gauge with more features and longer warranty for about 1/2 the price of your competition?  Why do you sell the FS 502 at such a great price?

Here's the story.  Five years ago we got into the paint meter business (coating thickness gauges) by accident. I was buying cars in the snow and sleet in Michigan and realized that I needed  a paint thickness gauge to see if the cars had been repainted.  I looked at all the gauges on the market and was shocked at the prices. A basic "Orange" gauge was $700. I looked some more and found a German Company that offered a better gauge for less money...but it was still way too much money. Then...

I Discovered Two Key Facts That You Need To Know...

1. The Instrument Industry is very old fashioned.  They have always sold at extremely high margins. They actually have what you might call a "good ole boys network." They get fat and the buyer pays a premium. Many of these companies are headquartered in Europe where they have very high labor costs...which you pay!

2. The distribution networks are expensive and old fashioned.  All of the big manufacturers attend multiple trade shows every year.  These shows are extremely expensive and they build the cost of these trade shows into the price of their gauge. You pay again!

The majority of the gauges are built in Europe and then sold to the American Headquarters at a hefty profit. You pay this mark up.  Almost all of the manufacturers re-sell through distributors who expect to make about a 30-40% margin. You pay for this too!

 Why you get a better gauge and save money with FenderSplendor

After 3 years in the business we decided to manufacturer our own gauges and sell them directly to the end user. We realized that we could cut many layers of profit out of the price of a thickness meter.  We also knew that we could sell directly on the Internet and cut our cost of sales drastically. Don't look for FenderSplendor at the trade shows!

We also realized that our sales volume would "multiply" if we made our gauges more affordable...so we cut the price to the bone. Then we also decided to give a better written warranty so that our buyers would have greater protection.

The bottom line is that you get the best possible gauge for close to 1/2 the price. Call us toll free at 866-310-2539 7 day a week if you have questions.

If you are ready to get a FenderSplendor FS 502 click the button.

Where is the FenderSplendor FS 502 Gauge manufactured and how do I know that it's a good thickness gauge? Click the button below to learn all the 'inside secrets'.

I am a car dealer..do I need the FS 488 or the FS 502? Click Here

FenderSplendor, Inc
PO Box 6277
Gulf Shores, AL 36547

USA Toll Free: 866-310-2539
Office: 251-948-2130
Fax: 253-663-0906

fendersplendor@msn.com